Cathodic Protection-Casting Anodes

PRODUCTION

Raw Material Selection

Quality Control Personnel/ Lab In-charge inspects the raw material against the purchase order specifications and verifies the Material Test Certificate.
Aluminum Purity 99.86%
Zinc Purity 99.995%
Indium Purity 99.990%

Facility: Store

Fabrication

Fabrication personnel will do the design of mould based on anode configurations. Mean length/height along with shrinkage allowance shall be provided to fabricating personal as per the anode drawing.

Facility: Workshop

Core

Core shall be manufactured for every new drawing according to the anode drawing requirement. Core dimensional acceptance shall be as per tolerance limits specified in drawing/NACE standards.

Facility: Workshop

Electrical Resistance

Facility: Testing Laboratory

Welding Of Steel Materials

Welding shall be in accordance with the relevant qualified welding procedure issued for each material specification and process in accordance with international standards such as AWS D1.1 and when necessary, such procedures shall be approved by customers.

Facility: Workshop

Production

Aluminum and Zinc Anodes are manu factured with standard procedures and following the health and safety measurements.

Facility: Foundry and Rotatory Furnace

Quality Commitments

Optical Emission Technique is used for Chemical Composition to bring the perfect material specifications of the alloy conforming to DNV RP B401, ASTM B-418 Type II, US Mil-Spec 18001 K.
Electrochemical testing shall be carried out as per DNV RBGL401-2017 Certification.

Facility: R & D Laboratory

ISO 9001:2015 Certified by TUV Nord Gmbh standard

Other standards include • MIL, • NACE, • NORSOK in all aspects of Anode Casting.

Delivery Services